Request Information

Handheld plasma system  087108
for cutting and gouging metal

Operating data
  Thickness Cut speed
  Handheld cut capacity
Recommended 1" (25 mm) 20 ipm
(500 mm/min)
  1-1/4"(32 mm) 10 ipm
(250 mm/min)
Severance 1-1/2" (38 mm) 5 ipm
(125 mm/min.)
  Mechanized pierce capacity
 

5/8" (12 mm)

 Specifications

Input Voltages CSA

CE		 200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
400 V, 3-PH, 50/60 Hz
Input Current @12.2 kW CSA

CE		 200/208/240/480 V, 1-PH, 70/68/58/29 A
200/208/240/480/600 V, 3-PH, 42/40/35/18/17 A
380/400 V, 3-PH, 20.5/19.5 A
Output current   25 - 85 A
Rated output voltage   143 VDC
Duty cycle @ 40°C (104°F) CSA





CE		 60% @ 85 A, 230 – 600 V, 3-PH
60% @ 85 A, 480 V, 1-PH
50% @ 85 A, 240 V, 1-PH
50% @ 85 A, 200 – 208 V, 3-PH
40% @ 85 A, 200 – 208 V, 1-PH
100% @ 66 A, 230 – 600 V, 1/3-PH
60% @ 85 A, 380/400 V, 3-PH
100% @ 66 A, 380/400 V, 3-PH
Open circuit voltage (OCV) CSA
CE		 305 VDC
270 VDC
Dimensions with handles   19.7" (500 mm) D; 9.2" (234 mm) W;
17.9" (455 mm) H
Weight with 25' (7.6 m) torch CSA
CE		 71 lbs (32 kg)
62 lbs (28 kg)
Gas Supply   Clean, dry, oil-free air or nitrogen
Recommended gas inlet
flow rate / pressure		 Cutting:    400 scfh, 6.7 scfm (189 l/min) @ 85 psi (5.6 bar)
Gouging:  450 scfh, 7.5 scfm (212 l/min) @ 70 psi (4.8 bar)
Input power cable length   10' (3 m)
Power supply type   Inverter - IGBT



Engine-driven generator operation

Engine Drive
Rating (kW)
System Output
(amps)
Performance
(arc stretch)
20
85
Full
15
70
Limited
15
60
Full
12
60
Limited
12
40
Full
8
40
Limited
8
30
Full



Cut Chart

MaterialThicknessCurrentMaximum cut speed*
 inchesmm
amps
ipm
mm/min
Mild Steel 10 GA
1/4
1/2
3/4
1
1-1/4
3
6
12
19
25
32
45
85
85
85
85
85
205
200
70
36
21
14
5000
5330
2000
920
560
350
Stainless Steel 1/4
1/2
3/4
1
6
12
19
25
85
85
85
85
205
60
30
18
5850
1750
770
475
Aluminum 1/4
1/2
3/4
1
6
12
19
25
85
85
85
85
215
85
46
25
6200
2400
1170
670


* Maximum cut speeds are the results of Hypertherm’s laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications.
Refer to the operator manual for more details.

  
  Metal removal rate
  Gouge capacity
  19.5 lbs. (8.8 kg) per hour
  Groove profile
  .23" (5.8 mm) D x .28" (7.1 mm) W
Unit of Measure

Specifications

Type

 N/A Hypertherm Powermax 85