Item # Powermax 65, Hypertherm Powermax 65 083270 On Sutton-Garten Co.

Request Information

Handheld or mechanized plasma system 083270
for cutting and gouging metal

Operating data
	Thickness	Cut speed
	Handheld cut capacity
Recommended	3/4" (19 mm)	20 ipm (500 mm/min)
	1"(25 mm)	10 ipm (250 mm/min)
Severance	1-1/4" (32 mm)	5 ipm (125 mm/min.)
	Mechanized pierce capacity
	1/2" (12 mm)
	Metal removal rate
	Gouge capacity
	10.7 lbs. (4.8 kg) per hour
	Groove profile
	.14" (3.5 mm) D x .26" (6.6

Handheld or mechanized plasma system 083270
for cutting and gouging metal

Operating data

Thickness

Cut speed

Handheld cut capacity

Recommended

3/4" (19 mm)

20 ipm
(500 mm/min)

1"(25 mm)

10 ipm
(250 mm/min)

Severance

1-1/4" (32 mm)

5 ipm
(125 mm/min.)

Mechanized pierce capacity

1/2" (12 mm)

Metal removal rate

Gouge capacity

10.7 lbs. (4.8 kg) per hour

Groove profile

.14" (3.5 mm) D x .26" (6.6 mm) W

Specifications

Input Voltages	CSA CE	200 – 480 V, 1-PH, 50/60 Hz 200 – 600 V, 3-PH, 50/60 Hz 400 V, 3-PH, 50/60 Hz
Input Current @ 9 kW	CSA CE	200/208/240/480 V, 1-PH, 52/50/44/22 A 200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A 380/400 V, 3-PH, 15.5/15 A
Output current		20 - 65 A
Rated output voltage		139 VDC
Duty cycle @ 40°C (104°F)	CSA CE	50% @ 65 A, 230 – 600 V, 1/3-PH 40% @ 65 A, 200 – 208 V, 1/3-PH 100% @ 46 A, 230 – 600 V, 1/3-PH 50% @ 65 A, 380/400 V, 3-PH 100% @ 46 A, 380/400 V, 3-PH
Open circuit voltage (OCV)	CSA CE	295 VDC 270 VDC
Dimensions with handles		19.7" (500 mm) D; 9.2" (234 mm) W; 17.9" (455 mm) H
Weight with 25' (7.6 m) torch	CSA CE	64 lbs (29 kg) 57 lbs (26 kg)
Gas Supply		Clean, dry, oil-free air or nitrogen
Recommended gas inlet flow rate / pressure	Cutting: 400 scfh; 6.7 scfm (189 l/min) @ 85 psi (5.6 bar) Gouging: 450 scfh; 7.5 scfm (212 l/min) @ 70 psi (4.8 bar)
Input power cable length		10' (3 m)
Power supply type		Inverter - IGBT

Engine-driven generator operation

Engine Drive Rating (kW)	System Output (amps)	Performance (arc stretch)
15	65	Full
12	65	Limited
12	40	Full
8	40	Limited
8	30	Full

Cut Chart

Material	Thickness		Current	Maximum cut speed*
	inches	mm	amps	ipm	mm/min
Mild Steel	10 GA 1/4 1/2 3/4 1	3 6 12 19 25	45 65 65 65 65	205 145 50 24 13	5000 3900 1430 610 350
Stainless Steel	10 GA 1/4 1/2 3/4	3 6 12 19	45 65 65 65	168 120 40 19	4200 3800 1150 490
Aluminum	1/4 1/2 3/4	6 12 19	65 65 65	190 60 30	5500 1660 770

* Maximum cut speeds are the results of Hypertherm’s laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications.
Refer to the operator manual for more details.

less

Unit of Measure

Specifications

Type

Hypertherm Powermax 65

Catalog

Specifications

Engine-driven generator operation

Cut Chart

Specifications

Type