The Atlas PipeMate helps produce faster and cleaner welds with a minimum of manual handling and positioning.
These portable units have a low profile, 9-1/4" H x 18" L x 8" W, and a covered footswitch for on/off control, which makes them convenient and comfortable for the welder working at a shop bench, or for on-site welding.
The dual speed, Atlas PipeMate, and a non powered companion Idler Rolls unit,will support and turn properly balanced loads up to 1000 pounds. A built-in, broad spectrum, high frequency filter prevents any erratic motor speeds when Tig welding. Speed ranges can be easily changed by removing the front access panel and manually reversing the gears.
A slow 0-30 ipm or a faster 0-60 ipm final drive, is powered by a 1/15hp, 115v, AC/DC gear motor. When removing the cover to change gears, or work on the unit, there is a built-in, automatic, electrical disconnect that prevents shock. The Atlas PipeMate and Idler Rolls have two, 6" x 2" roller bearing wheels with rubber tires providing high load handling capacity, and heat and abrasion resistance. A "forward-off-reverse" selector switch; a speed control dial; and an easily accessible 2 amp fuse, for motor overload protection, are located on the front panel. The Atlas PipeMate may also be used with an Atlas Pipe Dollie as the idler roll, or with Atlas Adjustable Pipe Jacks.
These portable units have a low profile, 9-1/4" H x 18" L x 8" W, and a covered footswitch for on/off control, which makes them convenient and comfortable for the welder working at a shop bench, or for on-site welding.
The dual speed, Atlas PipeMate, and a non powered companion Idler Rolls unit,will support and turn properly balanced loads up to 1000 pounds. A built-in, broad spectrum, high frequency filter prevents any erratic motor speeds when Tig welding. Speed ranges can be easily changed by removing the front access panel and manually reversing the gears.
A slow 0-30 ipm or a faster 0-60 ipm final drive, is powered by a 1/15hp, 115v, AC/DC gear motor. When removing the cover to change gears, or work on the unit, there is a built-in, automatic, electrical disconnect that prevents shock. The Atlas PipeMate and Idler Rolls have two, 6" x 2" roller bearing wheels with rubber tires providing high load handling capacity, and heat and abrasion resistance. A "forward-off-reverse" selector switch; a speed control dial; and an easily accessible 2 amp fuse, for motor overload protection, are located on the front panel. The Atlas PipeMate may also be used with an Atlas Pipe Dollie as the idler roll, or with Atlas Adjustable Pipe Jacks.
Unit of Measure
Specifications
Other Specifications |
N/A
Capacity: 1,000 lbs. Balanced loads with Idler Roll 500 lbs. Load bearing. Diameter Range: 1 1/2" to 17" diameters Dual Speed: 0-30 ipm or 0-60 ipm Drive Motor: 1/15 hp Power Requirement: 115 V, 50/60 Hz Bearings: Heavy duty axle roller bearings Motor Overload Protection: 1.5 amp fuse Rotation: Reversible Speed Control: Solid state fully variable over entire speed range Start/Stop Control: Footswitch (on/off) with 8' cable Construction: Heavy duty steel construction, Durable enamel finish, Two handles for easy handling Net Weight: 60 lb Shipping Weight: 65 lb |
