| | .14" (3.5 mm) D x .26" (6.6 mm) W Specifications | Input Voltages | CSA
CE | 200 – 480 V, 1-PH, 50/60 Hz
200 – 600 V, 3-PH, 50/60 Hz
400 V, 3-PH, 50/60 Hz |
|---|
| Input Current @ 9 kW | CSA
CE | 200/208/240/480 V, 1-PH, 52/50/44/22 A
200/208/240/480/600 V, 3-PH, 32/31/27/13/13 A
380/400 V, 3-PH, 15.5/15 A |
|---|
| Output current | | 20 - 65 A |
|---|
| Rated output voltage | | 139 VDC |
|---|
| Duty cycle @ 40°C (104°F) | CSA
CE | 50% @ 65 A, 230 – 600 V, 1/3-PH
40% @ 65 A, 200 – 208 V, 1/3-PH
100% @ 46 A, 230 – 600 V, 1/3-PH
50% @ 65 A, 380/400 V, 3-PH
100% @ 46 A, 380/400 V, 3-PH |
|---|
| Open circuit voltage (OCV) | CSA
CE | 295 VDC
270 VDC |
|---|
| Dimensions with handles | | 19.7" (500 mm) D; 9.2" (234 mm) W;
17.9" (455 mm) H |
|---|
| Weight with 25' (7.6 m) torch | CSA
CE | 64 lbs (29 kg)
57 lbs (26 kg) |
|---|
| Gas Supply | | Clean, dry, oil-free air or nitrogen |
|---|
Recommended gas inlet
flow rate / pressure | Cutting: 400 scfh; 6.7 scfm (189 l/min) @ 85 psi (5.6 bar)
Gouging: 450 scfh; 7.5 scfm (212 l/min) @ 70 psi (4.8 bar) |
|---|
| Input power cable length | | 10' (3 m) |
|---|
| Power supply type | | Inverter - IGBT |
|---|
Engine-driven generator operation | Engine Drive
Rating (kW) | System Output
(amps) | Performance
(arc stretch) |
|---|
| 15 | 65 | Full | | 12 | 65 | Limited | | 12 | 40 | Full | | 8 | 40 | Limited | | 8 | 30 | Full |
Cut Chart | Material | Thickness | Current | Maximum cut speed* |
|---|
| | inches | mm | amps | ipm | mm/min |
|---|
| Mild Steel | 10 GA
1/4
1/2
3/4
1 | 3
6
12
19
25 | 45
65
65
65
65 | 205
145
50
24
13 | 5000
3900
1430
610
350 |
|---|
| Stainless Steel | 10 GA
1/4
1/2
3/4 | 3
6
12
19 | 45
65
65
65 | 168
120
40
19 | 4200
3800
1150
490 |
|---|
| Aluminum | 1/4
1/2
3/4 | 6
12
19 | 65
65
65 | 190
60
30 | 5500
1660
770 |
|---|
* Maximum cut speeds are the results of Hypertherm’s laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications.
Refer to the operator manual for more details.
|
