| | .13" (3.3 mm) D x .22" (5.5 mm) W Specifications Input Voltages
(± 10%) | CSA
CE | 200 – 240 V, 1-PH, 50-60 Hz
230 V, 1-PH, 50-60 Hz
400 V, 3-PH, 50-60 Hz |
|---|
| Input Current @5.95 kW | CSA
CE | 200/230 V, 1-PH, 34/28 A
230 V, 1-PH, 30 A
380/400 V, 3-PH, 10.5/10 A |
|---|
| Output current | | 20 - 45 A |
|---|
| Rated output voltage | | 132 VDC |
|---|
| Duty cycle @ 40°C (104°F) | CSA
CE
CE | 50% @ 45 A, 200 – 240 V, 1-PH
60% @ 41 A, 200 – 240 V, 1-PH
100% @ 32 A, 200 – 240 V, 1-PH
50% @ 45 A, 230 V, 1-PH
60% @ 41 A, 230 V, 1-PH
100% @ 32 A, 230 V, 1-PH
50% @ 45 A, 380/400 V, 3-PH
60% @ 41 A, 380/400 V, 3-PH
100% @ 32 A, 380/400 V, 3-PH |
|---|
| Open circuit voltage (OCV) | | 275 VDC |
|---|
| Dimensions with handles | | 16.75" (426 mm) D; 6.75" (172 mm) W;
13.7" (348 mm) H |
|---|
| Weight with 20' (6.1 m) torch | CSA
CE | 31 lbs (17 kg) |
|---|
| Gas Supply | | Clean, dry, oil-free air or nitrogen |
|---|
Recommended gas inlet
flow rate / pressure | Cutting: 360 scfh; 6 cfm (170 l/min) @ 80 psi (5.5 bar)
Gouging: 360 scfh; 6 cfm (170 l/min) @ 60 psi (4.1 bar) |
|---|
| Input power cable length | | 10' (3 m) |
|---|
| Power supply type | | Inverter - IGBT |
|---|
Engine-driven generator operation | Engine Drive
Rating (kW) | System Output
(amps) | Performance
(arc stretch) |
|---|
| 10 | 45 | Full | | 8 | 45 | Limited | | 6 | 30 | Full |
* Maximum cut speeds are the results of Hypertherm’s laboratory testing.
For optimum cut performance, actual cutting speeds may vary based on different cutting applications.
Refer to the operator manual for more details.
|
