Order this blending system setup to deliver your desired mix of nitrogen and co2 to your beverage system. Can also specify 1/4" or 3/8" barbs.
Unit of Measure
Specifications
Size |
N/A 9.5" Wide (Incl. Mounting Flanges) x 10" High x 4.5" Deep |
Application |
N/A Used for single blend long draw beer systems. Best for dispensing one style of beer. Blends CO2 and N2 to your specifications. |
Hook-Up |
N/A Two Inlet Lines & One Outlet Line |
Fittings |
N/A Panel comes with standard 1/4" female NPT fittings. Hose barbs available at no additional costs. Specify size: 1/4", 5/16", and 3/8". |
Accuracy & Flow Range |
N/A Maintains accuracy of ± 2% of full scale or better within the flow range of 0.4 to 40 liters per minute (0.85 to 85 cubic feet per hour). |
Blender |
N/A Up to 15 kegs/hr. dispensed. |
Inlet Pressures |
N/A 55-150 psi, however, panel can be set to match any conditions. Blender tuned at inlet pressure of existing system. Standard 55 and 70 psi. |
Outlet Pressures |
N/A Adjustable outlet pressures of 0-60 psi. The maximum outlet pressure will always be 10 psi lower than the lowest inlet pressure. The panel can also be ordered with outlet pressure set to custom ranges. |
